Reinforcement Mat (450gsm) - Full Roll (33kg)

Part Number - TSP03

TuffStuff® Re-inforcement Matting is laid onto a roof deck and covered with base coat to create a fully waterproof seal.


CSM Tissue Bandage should be laid first to over all areas where roof trims meet the deck.


Re-inforcement Matting should be laid onto a dry surface and installers should lay the first piece at the lowest point of the roof. Each additional piece should overlap the piece previously laid by 50mm.


Once all matting is down base coat should be applied.


Do not attempt to lay reinforcement matting and cover with base coat in wet conditions. The process must be only carried out in dry conditions.

Tuff Waterproofing Limited
Unit 5, First Avenue
Sherburn Industrial Estate
Sherburn in Elmet
North Yorkshire
LS25 6PD

Tel: 01977 680250

FIRE CERTIFICATION INFORMATION

The TuffStuff® range of base coat and top coat resins have been rated to the highest possible levels of fire safety and are classified to BS EN 476: Part 3: 2004 (AA & AB).